Skip to content
Quote
Login
  • Merch
  • Apex Membrane
  • Laminates
  • Custom Design
    • Measure Your Sails
  • One Design
  • FAQ
  • Contact
    • About
    • Blog
    • Contact Us
    • Careers & Pathways
    • Sail Upcycle Program
  • Cart
  • Merch
  • Apex Membrane
  • Laminates
  • Custom Design
    • Measure Your Sails
  • One Design
  • FAQ
  • Contact
    • About
    • Blog
    • Contact Us
    • Careers & Pathways
    • Sail Upcycle Program
  • Cart
Quick Quote
Login

"*" indicates required fields

Step 1 of 8

12%

Track Entry

Measure the height from the top surface of the boom/gooseneck to the top (highest) opening of the mast gate. This allows us to tailor the sail tack nicely. Again, if you have a boom top surface that drops away, project the top surface of the boom across to the back surface of the mast and measure this distance.
How does your main foot attach to your boom?*
Distance from the back surface of the mast to the opening of the boom track gate in mm.

Luff Attachment

How does your main luff attach to your mast?

Will you measure the slides/bolt rope, or the track
While you can measure the internal track diameter, or the slug/rope, knowing which one you used helps our numbers.
(Leave blank if you have a bolt rope with no slugs) This is the widest part of the car or slug as it sits in the mast track. If it's a round slug, then it will be the diameter of the slug. If it's a flat based slug, then it will be the maximum width of the base.
This is the width of the neck of the slide as it comes out of the mast. (Leave blank if you have a bolt rope with no slugs)
Please also note if you used a drill bit to size the track, or calipers to measure the luff rope.
If you have identifyling marks on the slides or slugs, including brands and or code numbers, please put them here.
If you have slugs or cars, please measure the distance from the back surface of the mast to the leading edge of the sail fabric.
If you'd like to upload photos of mast cars/slugs, you can do that here. Please also include a photo of the mast gate.
Drop files here or
Max. file size: 256 MB.
    Clew Diagram
    How does your Mainsail Clew Attach?
    This is typically the inner width of the shackle that holds the sail to the outhaul. Calipers/Steel Ruler - Please measure the inside gate of the shackle that attaches to your clue. This width allows us to make sure your exisiting hardware will be compatible with the sail hardware & thickness.
    Please take a side on photo of your boom with clew attached. Frame the photo to include; the end of the boom, the underside of the boom, and the corner of the sail all in the same shot if possible.
    Drop files here or
    Max. file size: 5 MB, Max. files: 3.
      • FAQ
      • Warranty, Guarantee & Repairs
      • Shipping
      • Sail Maker Melbourne, Geelong & Victoria | Custom Sails by Kraken
      • FAQ
      • Warranty, Guarantee & Repairs
      • Shipping
      • Sail Maker Melbourne, Geelong & Victoria | Custom Sails by Kraken
      • Email: [email protected]

      © Kraken Sails Pty Ltd 2024 All Rights Reserved.