Skip to content
Quote
Login
Merch
Apex Membrane
Laminates
Custom Design
Measure Your Sails
One Design
FAQ
Contact
About
Blog
Contact Us
Careers & Pathways
Sail Upcycle Program
Cart
Merch
Apex Membrane
Laminates
Custom Design
Measure Your Sails
One Design
FAQ
Contact
About
Blog
Contact Us
Careers & Pathways
Sail Upcycle Program
Cart
Quick Quote
Login
"
*
" indicates required fields
Step
1
of
8
12%
Your Name
Email
Boat Name & Sail Number
Track Entry
D - Mast Track Gate Entry Height from boom (in cm)
Measure the height from the top surface of the boom/gooseneck to the top (highest) opening of the mast gate. This allows us to tailor the sail tack nicely. Again, if you have a boom top surface that drops away, project the top surface of the boom across to the back surface of the mast and measure this distance.
How does your main foot attach to your boom?
*
Loose (Along Foot)
Bolt Rope
Slugs/Sides
E - Boom Track Gate Entry Set Back (in cm)
Distance from the back surface of the mast to the opening of the boom track gate in mm.
Luff Attachment
How does your main luff attach to your mast?
Bolt Rope
Slides / Slugs
Cars
External Car Rail
A combination of Cars and Slides/Slugs
Other
Will you measure the slides/bolt rope, or the track
While you can measure the internal track diameter, or the slug/rope, knowing which one you used helps our numbers.
Will Measure A Slug/Slide/Car
Am Measuring the Track Internals
Base Width of Slide or car
(Leave blank if you have a bolt rope with no slugs) This is the widest part of the car or slug as it sits in the mast track. If it's a round slug, then it will be the diameter of the slug. If it's a flat based slug, then it will be the maximum width of the base.
Slug / Slide Neck
This is the width of the neck of the slide as it comes out of the mast. (Leave blank if you have a bolt rope with no slugs)
Luff Rope Diameter (mm) (if using luff rope)
Please also note if you used a drill bit to size the track, or calipers to measure the luff rope.
Any identifying marks on your slides, slugs and/or cars?
If you have identifyling marks on the slides or slugs, including brands and or code numbers, please put them here.
Luff Set Back
If you have slugs or cars, please measure the distance from the back surface of the mast to the leading edge of the sail fabric.
Photo of Mast Cars/Slugs & Mast Gate
If you'd like to upload photos of mast cars/slugs, you can do that here. Please also include a photo of the mast gate.
Drop files here or
Select files
Max. file size: 256 MB.
How does your Mainsail Clew Attach?
Clew Strap & Shackle
Track and Pin
Slug and Pin
D -Clew Attachment Inner Width (mm)
This is typically the inner width of the shackle that holds the sail to the outhaul. Calipers/Steel Ruler - Please measure the inside gate of the shackle that attaches to your clue. This width allows us to make sure your exisiting hardware will be compatible with the sail hardware & thickness.
Clew Photo
Please take a side on photo of your boom with clew attached. Frame the photo to include; the end of the boom, the underside of the boom, and the corner of the sail all in the same shot if possible.
Drop files here or
Select files
Max. file size: 5 MB, Max. files: 3.